Visonic POWERMASTER-10, Installer'S Manual, Page: 42 / 106

D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide 41
– Deleting a Device
[1] Enter the
Installer Menu
, select the "
02.ZONES/DEVICES
" option (see section 3.2) and then select the
"
DELETE DEVICES
" option.
[2] Select the respective Group of the device you wish to delete i.e. "
CONTACT SENSORS
", "
MOTION SENSORS
",
"
GLASSBREAK SENS
.", "
SMOKE SENSORS
", "
CO SENSORS
", "
G AS SENSORS
", "
F LOOD SENSORS
",
"
TEMPERATURE SENS
", "
WIRED SENSORS
", "
TAGS(Proximity)
", "
KEYFOBS
", "
KEYPADS
", "
SIRENS
" and
"
REPEATERS
". For example, "
MOTION SENSORS
".
[3] Scroll the Device Group, identify (by zone and/or ID number) the exact device you wish to replace, for
example: "
Z01: Motion Sensor > ID No. 120
-
1254
" and press the button.
[4] The display prompts you
. To delete the device, press the (OFF) button.
3.4.4 Modifying or Reviewing a Device
To
Modify
or
Review
the device parameters proceed as follows:
Step 1 Step 2 Step 3 Step 4
Step 5
Select "MODIFY
DEVICES" Option
[1]
Select the respective
device Group
[2]
Select exact device
you wish to modify
[3]
Select the Parameter
you wish to modify
[4]
Modify the
Parameter
See [4]
When
done
to Step
3
– Modifying or Reviewing a Device
[1] Enter the
Installer Menu
, select the
"02.ZONES/DEVICES"
option (see section 3.2) and then select the
"
MODIFY DEVICES
"
option.
[2] Select the respective Group of the device you wish to review or modify i.e. "
CONTACT SENSORS
", "
MOTION
SENSORS
", "
G LASSBREAK SENS.
", "
SMOKE SENSORS
", "
C O SENSORS
", "
G AS SENSORS
", "
F LOOD SENSORS
",
"
TEMPERATURE SENS
", "
WIRED SENSORS
", "
KEYFOBS
", "
KEYPADS
" and "
SIRENS
". For example, "
MOTION
SENSORS
".
[3] Scroll the Device Group, identify (by zone and/or ID number) of the exact device you wish to modify or review,
for example:
"
Z10: Motion C amera > ID No. 140
-
1737
".
[4] From here on the process is same as the configuration process that follows the enrollment of that device. To
continue, refer to Section 3.4.2 "Adding a New Wireless Device" Part B Step 6. When done, the display will
show the next device of the same type (i.e. "Motion camera").
Z10: DEV SETTINGS
Z10:SET CHIME
Z10: ZONE TYPE
Z10:LOCATION
ID No. 140
-
1737
Z10:Motion Camra MOTION SENSORS
CONTACT SENSORS
MODIFY DEVICES
02.ZONES/DEVICES
<OFF> TO DELETE