D-303222 PowerMaster-10 / PowerMaster-30 Installer's Guide
69
Step 1
Step 2
Step 3
Step 4
Step 5
Select "PGM
DEVICES" option
[1]
Select "PGM DEVICE
01" or "LOCKOUT
TIME"
[2]
Select a mode to
configure
[3]
Select the new
setting
[4]
[5]
[6]
Return
to step
3.
See
[4]
[7]
[8]
– Entering the "PGM Output" Menu
To Select an Option:
[1] Enter the
Installer Menu
and select the
option (see section 3.2).
[2] Select the sub-menu option you need, for example:
.
[3] Select the parameter you wish to configure for example:
[4] To continue, go to the Section of the selected sub-menu option and look for the option you wish to
configure. After configuring the selected parameter the display returns to step 3.
[5] The "toggle" option setting is available only for "PGM: BY KEYFOB".
[6] Select "Turn on" to activate the PGM device, "Turn off" to stop the PGM device and "disable" to deactivate
the PGM device.
[7] The time selection will take effect when the "activate PULSE" is enabled.
[8] Select "start" / "stop" and enter the desired time.
To Change the Configuration of the Selected Option:
When entering the selected option, the display shows the default (or the previously selected) setting marked
with (
).
If you wish to change the configuration, scroll
the "Option settings" menu and
select the setting you
wish and press
to confirm. When done the display bring you back to Step 3.
05:OUTPUTS
PGM: BY ARM AWAY
PGM: BY ARM HOME
disable
PGM DEVICE 01
PGM: BY DISARM
PGM: BY MEMORY
PGM: BY DELAY
PGM: BY KEYFOB
05:OUTPUTS
PGM DEVICE 01
PGM: BY MEMORY
turn ON
turn OFF
activate PULSE
PGM: BY SENSOR
PGM:BY LINE FAIL
Zone A Z:_ _
Zone B Z:_ _
Zone C Z:_ _
by line fail NO
by line failYES
LOCKOUT TIME
start
–
HH:MM A
sto
p
–
HH:MM A
PGM DEVICES
PGM: PULSE TIME
pulse time 2s
pulse time 30s
pulse time 2m
pulse time 4m
toggle