VE810 Series 4 User Manual
118
© 2015 Vision Engraving Systems
5.4
Installing Additional Drivers
If you need to install additional drivers, such as the VE810 S4 Vise driver or for another machine, in the
Vision 9 software, select File from the top menu bar, then select Install and click on Cutting Devices.
The Installation Wizard will begin.
The Driver Installation Wizard window will appear. Select the machine series from the Manufacturer list
on the left side by placing a check mark in the box to the left of the machine you wish to use the driver
for, then select the driver(s) from the Output Device list on the right side of this window by placing a
check mark in the box to the left of the driver(s) you wish to install. Click on Next to install the driver(s).
