Advanced Operation
107
© 2015 Vision Engraving Systems
5.2
Custom Home Positions - Using Set Offset
For some applications, it may be easier to engrave an item by setting a custom home position.
Typically, the home is set to a point on your material in the upper left hand corner of the area to be
engraved. An example of this is shown below using an electrical outlet cover.
In this example, the user has identified the engraving area on an item, and the home (0,0) position of
the machine will be set to match the upper left corner of the engraving area. Referencing the drawing
above, the engraving area is 1.25 inches wide x 0.25 inches high.
