Maxi 4875 and Midi 4845
Installation and User Manual
Page 7 of 40
WARNING !!
DO NOT SCATTER FLAT BATTERIES IN THE ENVIRONMENT !
DEPOSIT THEM IN CONTAINERS PROVIDED FOR THE PURPOSE.
Use AA LR6 1.5V alkaline batteries only. The 4 batteries of the safe should
be replaced at once. We also suggest to check battery charge level before
each seasonal closing (that is to say for longer periods than three months).
When the batteries are almost flat, after any press of the key ENTER
the “bAttLO” message will appear on the display: replace then
batteries.
After the first flat battery signal, it would still be possible to make more than
200 operations before the electronics stops working. Exceeded such limit,
and for a certain period only, the safe will permit a unique last opening after
which the door will remain open. When battery charge level becomes too
low to activate the internal mechanism, the safe could be opened with the
mechanical emergency key only.
Note. Electronic board memory is non-volatile, that is to say that
stored codes are not erased if batteries are removed/replaced.
Maxi 4875 and Midi 4845
Installation and User Manual
Page 8 of 40
3.2
Keypad with display
On the keypad appear standard digits (from 0 to 9) and 2 special keys:
COMB
and
ENTER
.
The
COMB
key is used to cancel the last inserted digit or to change the
codes of the safe while the
ENTER
key is used to confirm the just inserted
combination.
On display appear all the inserted digits and notes regarding the ordinary
use of the safe (example: on display appears “OPEnEd” when the safe is
successfully opened).
Fig. 4
