Viro Maxi 4875, Installation And User Manual

Page: 16 / 22

Maxi 4875 and Midi 4845 Installation and User Manual Page 29 of 40
5 FUNCTIONS FOR THE GUEST
5.1 Instructions for the Guest
The instructions for the guest are printed both on the oval sticker on
the door (in italian and english) and on the plastified instruction
sheet inside the safe (in different languages).
We suggest to leave the
instruction sheet near the safe.
5.2 How to insert the Guest Code
In order to close or open the safe, it is necessary to insert a 6 digit code:
this code is called Guest Code.
Insert a Guest Code by following these steps:
1. When the door is open, press the COMB key, on the display 6 dashes
“------” will appear.
2. Enter a new Guest Code within 10 seconds: after each typed digit,
dashes are replaced by numbers.
In case of mistake, it is always possible to delete the last
inserted digit by pressing the key
COMB .
If no key is pressed within 10 seconds, the display will be
cleared and it will be necessary to start again from point 1.
3. After the 6 digits are entered the Guest Code is stored: the Guest
Code blinks for 5 seconds.
How to insert a Guest Code (door open)
COMB New Guest Code
Maxi 4875 and Midi 4845 Installation and User Manual Page 30 of 40
5.3 How to open the safe
1. Enter the Guest Code: the typed digits followed by the blinking
message “OPEn” will appear on the display.
2. At the end of the opening operation, the message “OPEnEd” appears
for a few seconds on the display, confirming that deadbolts have
correctly withdrawn into the door and that the safe is open.
How to open the safe
5.4 How to close the safe
1. Close the door manually.
2. While keeping the door closed, enter the Guest Code: on the display
will appear the typed digits and then the message “CLOSE”. It is
necessary to keep the door closed until this message blinks.
3. At the end of closing operation on the display appears the message
“CLOSEd” for a few seconds. This is to confirm that the safe has been
correctly closed.
How to close the safe
Guest Code
Guest Code
Keep the door closed until the
message “CLOSEd” appears.