Maxi 4875 and Midi 4845
Installation and User Manual
Page 17 of 40
B
Opening the safe with an Electronic Key enabled by the Enabling
Safe – ONE SHOT function
In this working mode the Electronic Key, only if previously enabled by the
Enabling Safe and combined with a Password specially generated, allows to
open a specific safe without knowing its Guest Code. Furthermore, the
Electronic Key will work for one opening only (ONE SHOT function).
The Electronic Key enabling has to be done by the owner of the Hotel Code
only.
B.1
How to enable the safe to the use of the Electronic Key with ONE
SHOT function
(operation recommended during the first installation)
On all the safes of the hotel, excluding the Enabling Safe:
1.
When the door is open, enter the Hotel Menu by pressing:
ENTER - ENTER – digit
Hotel Code
- ENTER - 9
.
2.
Press
ENTER
5 times: the message “KEY” appears.
3.
Press
1
and then
ENTER
.
4.
Appears the message “VAL”: press
1
and then
ENTER.
5.
Appears the message “SVAL”: press
0
and then
ENTER.
On the Enabling Safe only:
1.
When the door is open, enter the Hotel Menu by pressing:
ENTER - ENTER – digit
Hotel Code
- ENTER – 9
.
2.
Press
ENTER
5 times: the message “KEY” appears.
3.
Press
1
and then
ENTER
.
4.
Appears the message “VAL”: press
1
and then
ENTER.
5.
Appears the message “SVAL”: press
1
and then
ENTER.
Now, all the safes are ready to work with the Electronic Keys.
Maxi 4875 and Midi 4845
Installation and User Manual
Page 18 of 40
How to enable the safe to the use of an Electronic Key with ONE
SHOT function (door open)
Note
. Once the safe has been enabled to the use of the Electronic Key
(KEY=1), it will not be possible to open it with the previously set Area
Master Codes anymore. Safe could once again be opened with the previously
set Area Master Codes after having retrieved the KEY value to 0 only (that is
after having disabled Electronic Key). In order to set the KEY value to 0,
follow above described procedure but at points 3, 4 and 5 press
0
.
B.2
How to assign the Electronic Key to an hotel area
•
Unthread the plastic cap situated near the display, on safe door top
right corner and insert the Electronic Key into the proper connector
(see Fig. 6 page 15).
•
Press:
ENTER – ENTER – digit
Hotel Code
– ENTER – 3 –
digit
Area Master Code
– ENTER.
•
On the display it will appear one
Enabling Code
for 10 seconds which
has to be immediately taken down. Once copied the code, remove the
Electronic Key and insert the plastic cap.
ENTER
ENTER
Hotel Code
ENTER
9
ENTER
5 times,
1
ENTER
1
ENTER
0
ENTER
1
ENTER
On
all
the
safes
excluding the Enabling
one.
On the Enabling Safe
only.
then
or
