ABOUT FIRESEC 4/60
• Certified by ECBS to EN 14450 52
• AIS approved - Insurance approval
• Secured by Design - Police approval
• Ideal domestic or office safe
• Wide selection of sizes
• Choice of key or electronic locking
• Electronic version has external power point
so you are never locked out if the batteries
go flat
• Removable shelf in each model
• Back & base fixing
OPENING THE SAFE:
• Press [ON].
• Enter valid 6-digit primary or secondary code then
l::ffliJI
Factory code is set as [1 ][2][3][4][5][6].
• Within 4 seconds turn handle clockwise until I stop
position is reached. The safe is now open.
m
••••••*
· l:fflt41
• If the safe was last opened with a different code
Both red and green LEDS will flash 3 times.
**x3
INCORRECT ENTRY:
• After 3 Incorrect entries a penalty time of 1 minute begins.
• During this time, no other entries can be made untill
the time is over.
• When the time period is over press [ON] to retry the
entry code.
• Enter a valid 6-digit primary or secondary code to open
the safe.
Every time an incorrect entry code is entered continuously
the penalty is extended to 2, 4, 8 up to the maximum of
16 minutes.
CHANGING THE PRIMARY CODE:
• Open the lock using a valid 6-digit primary code.
Factory code is set as [1 ][2][3][4][5][6].
• Press on
• Press enter
• Enter 1
• Press enter
• Enter existing code [1 ][2][3][4][5][6]
• Press enter
• Enter new 6 digit code followed by enter
• Enter new code for a second time and press enter to
confirm
If the new code was entered incorrectly start from [ON]
and repeat the process.
Burton Safes Limited Brockholes Business Park, Rock Mill Road, Brockholes, Holmfirth H09 7BN. t 01484 663 388 f 01484 666 338 [email protected] www.burtonsafes.co.uk
FIR
ESEC 4/60 ELECTRONIC
LOCK
MODEL:
FIRESEC 4/60
BS-INST-41
O
C
T - 16
