reset
88
ATMOS Console Commands Reference Manual (Binary) DO-008530-PS, Draft B (26th April 2001)
7.4
reset
7.4.1 Syntax
dhcpserver reset
7.4.2 Description
This command prompts the server to do a
warm
reset of itself. This has
the effect of bringing the server back up
as if
the system had been
rebooted, except that the lease database is preserved in SDRAM
between resets.
Please note, however, you should still save the configuration file to
FLASH if you want the configuration to be preserved upon rebooting
the whole system.
The advantage of this command is that it allows configuration changes
that have been confirmed (using
config confirm
) to take effect
immediately, rather than having to do a
flashfs update
and
restart
.
This command is also convenient for defining subnet topologies for IP
interfaces that have been added dynamically.
7.4.3 Example
prompt>
dhcpserver reset
dhcpserver: Reset request acknowledged. Reset imminent.
7.4.4 See also
Summary of Contents for ATMOS Console
