VIRATA ATMOS Console, Command Reference Manual

Page: 174 / 248

Summary
164 ATMOS Console Commands Reference Manual (Binary) DO-008530-PS, Draft B (26th April 2001)
Two obsolescent commands are not shown in the table above nor in the
fuller descriptions below; they are supported only for consistency with
older versions of the software:
The hidden commands that are not shown in the ip help output are
generally either commands that are useful for debugging rather than for
use by the end-user or commands of limited utility that are supported
mainly for consistency with earlier versions of the software; it may be
unwise to rely on their working in the same way in later versions of the
software.
There are also some obsolescent features that are supported only for
commands presented to standard input (at the
ip> prompt), not for
commands in TELL messages (such as commands at the prompt ip> ).
These are the processing of multiple commands on a line, separated by
a semi-colon “;”; comments, starting with “#”; definition of macros with
the syntax
var=value , used as $var within commands; and the env
command to list macros. These features are not discussed further in this
document.
Command Description
devices
Lists devices; equivalent to device with no
parameters.
subnets
Lists subnets; equivalent to subnet with no
parameters.