VIRATA ATMOS Console, Command Reference Manual

Page: 154 / 248

interface <n> localip
144 ATMOS Console Commands Reference Manual (Binary) DO-008530-PS, Draft B (26th April 2001)
10.24 interface <n> localip
10.24.1 Syntax
interface <n> localip <address>
10.24.2 Description
This command describes parameters for IPCP, the IP Control Protocol,
when providing the server end of an IPCP connection. The server knows
its own IP address (and may allocate an IP address to the remote end).
This command tells the PPP process, for a particular interface, the local
IP address to be associated with the local end.
For interface 1, this should be the same IP address as possessed by the
device ppp_device in the IP stack. See the IP dial-in server setup on
page 120 for more information.
If PPP channels are now associated with this interface, remote users can
dial in to those channels and will be connected to the IP stack. They can
be allocated IP addresses, see the command
<channel> remoteip on
page 139.
Call with 0.0.0.0 to remove any IP address setting. This is the default
state.
Configuration saving saves this information.
10.24.3 See also
<channel> remoteip on page 139.