VIRATA ATMOS Console, Command Reference Manual

Page: 65 / 248

BUN Console commands
ATMOS Console Commands Reference Manual (Binary) DO-008530-PS, Draft B (26th April 2001) 55
To determine the channel numbers that are currently in use, use the list
channels command to show all active channels on a port (or ports).
Note that to be uniquely specified, both a port name and channel
number must be given to console commands which display or
manipulate channels.
classname
The name of a class.
Class names may contain upper or lower case letters, though class name
matching is always case insensitive.
By default, BUN provides the following class definitions:
•
all : All ports in the system
• atm : All ports supporting ATM cell traffic
• adsl : All ports using the ADSL hardware interface
• ethernet : All ports using an ethernet hardware interface
• hdlc : All ports using an HDLC hardware interface
• pci : All ports using a PCI hardware interface
• usb : All ports using a USB hardware interface
A running system may contain additional classes specified via the class
configuration directive (see the commands list classes on page 64 and
list config on page 61).
If necessary, commands may be quoted using angle brackets or double
quotes. This prevents the stripping of white-space from the input line.
For example:
set port atm/usercomment="This is a comment string"
set port atm/usercommand=<An alternative syntax>
Within either form of quoted section, the corresponding close quote
character may be embedded by prefixing with a backslash. So you could
write:
set port atm/usercomment=<This is a "cell based" port>
set port atm/usercomment="This is a \"cell based\" port>
Mostly you probably won't need to worry about quotation, but be aware
of it's effects if you do.
The remainder of this section describes the commands themselves.