Manual VIPA TM
Chapter 3
Deployment
HB39E - TM - RE_900-2H611 - Rev. 10/16
3-25
Depending on the access mode to your Teleservice module, there are the
following possibilities to preset the IP address:
Access via Ethernet
The IP address must be the same as the IP address, which was preset by
the software tool "eBuddy".
Access via VPN connection
With a Teleservice module, which communicates via Talk2M, the IP
address may be found in the communication software "eCatcher".
As soon as a connection to the Teleservice module is established, the IP
address is shown in the "eCatcher".
•
Load your project in the SIMATIC manager from Siemens.
•
Choose in the menu
Options
>
Set
PG/PC interface.
•
Select in the according list the "PC Adapter (MPI)"; if appropriate you
have to add it first, the click at [Properties].
•
Switch to the register
MPI
.
•
Set the transfer parameters of your MPI net and type in an unused
address.
•
Switch to the register
Local connection
.
•
Select the COM port, which you have configured at eVCOM and set the
transfer rate to 38400baud. Confirm you settings with [OK]. Now your
CPU may be accessed with the TM via MPI by means of the PLC
functions.
Define access via
IP address
Settings in the
Siemens SIMATIC
Manager
Summary of Contents for 900-2H611
Page 4: ...Contents Manual VIPA TM ii HB39E TM RE_900 2H611 Rev 10 16...
Page 8: ...Safety information Manual VIPA TM 4 HB39E TM RE_900 2H611 Rev 10 16...
Page 70: ...Chapter 3 Deployment Manual VIPA TM 3 44 HB39E TM RE_900 2H611 Rev 10 16...
Page 72: ...Index Manual VIPA TM A 2 HB39E TM RE_900 2H611 Rev 10 16 M Stich...
