VIPA 900-2H611, Manual

Page: 36 / 72

Chapter 3 Deployment
Manual VIPA TM
3-10 HB39E - TM - RE_900-2H611 - Rev. 10/16
For the access to the Teleservice module valid IP address parameters are
necessary. The IP addresses are assigned by the network administrator.
Per default the Teleservice module is delivered with the IP address
10.0.0.53. You may switch to the IP address parameter wizard with "Set IP
address".
By clicking to [Browse...] each TM of the network is listed.
•
Choose the TM, which corresponds to the serial number. Confirm your
input and click to [Continue >].
•
The dialog window to enter IP address data is opened.
•
Enter the new IP address parameters. By clicking to [Continue >] the
new IP address parameters are transferred to the TM.
→ The TM module is started new. After a certain waiting period and
during successful transmissions this is reported.
•
[Finish >] closes the dialog.
With each new dial-in of the Teleservice module, this is assigned
automatically with a new IP address. This is called dynamic address
allocation.
Usually the TM sends an eMail containing the current valid IP address. By
this IP address the TM may be accessed.
With the service of a DNS service provider like e.g. www.no-ip.com there is
the possibility to directly access the TM by a name instead by the IP
address.
Here usually a free user account is to be established.
The corresponding DNS service provider may be selected on the Web
page of the TM at "Networking config" with the page "Publish IP address".
Here the user data may be entered.
During communication the dynamic IP address is submitted to the service
provider and there transformed to the symbolic name.
Changing the
IP address
Symbolic name
instead of
IP address