Manual VIPA TM
Chapter 3
Deployment
HB39E - TM - RE_900-2H611 - Rev. 10/16
3-13
TM - Reset
At the front-side of the Teleservice module there is a Reset button. This
may be located below the LEDs and may be operated by a pointed object.
With the Reset (
user reset
) extra created Web pages and Tag
configurations are erased. Here the communication settings are still
remaining.
For a
complete reset
please contact the VIPA support.
Caution!
An unauthorized
complete reset
, which possibly was not carefully executed,
leads automatically to the expiring of the warranty!
Then the device must be sent back to VIPA for reprogramming.
There is the following proceeding for the
user reset
:
•
Switch-off the Teleservice module.
•
Press the Reset button.
•
Switch-on the Teleservice module and leave the reset button pressed as
long as the "USER"-LED is blinking red.
•
Release the Reset button now.
Now the Teleservice module executes a restart. Wait until the "USER"-LED
blinks green.
Overview
User-Reset
Summary of Contents for 900-2H611
Page 4: ...Contents Manual VIPA TM ii HB39E TM RE_900 2H611 Rev 10 16...
Page 8: ...Safety information Manual VIPA TM 4 HB39E TM RE_900 2H611 Rev 10 16...
Page 70: ...Chapter 3 Deployment Manual VIPA TM 3 44 HB39E TM RE_900 2H611 Rev 10 16...
Page 72: ...Index Manual VIPA TM A 2 HB39E TM RE_900 2H611 Rev 10 16 M Stich...
