Vingtor Stentofon 3005050028, Technical User'S Manual

Page: 8 / 79

MARINE MASTER CLOCK
Document: 1717en19.doc
Author: PM
User Manual
Date: 2017-12-22
Page: 5 of 51
WESTERSTRAND URFABRIK AB
P.O. Box 133 Tel. +46 506 48000 Internet:: http://www.westerstrand.se
SE-545 23 TÖREBODA Fax. +46 506 48051 E-mail:
info@westerstrand.se
General description
Westerstrand Marine Master Clock is the ideal solution for distribution of both Local and UTC time on board
ships.
The Master Clock is equipped with several outputs and inputs for control of Slave Clocks as well as distribution
of time to computers and other equipment needing correct time. The four Slave Clock outputs can be
individually programmed for different types of clocks. External radio receivers / time synchronisation sources
can be connected when higher accuracy is needed.
For control and regulation of various energy consumers such as electrical striking plates, buzzers for pause
signalling etc, the master Clock has a built in yearly programmer with two relay outputs.
The Master Clock is equipped with 10 buttons and a 2 x 16 character LCD. To facilitate the change of time zone
two of the buttons are dedicated for this purpose. A light dimmer makes it possible to adjust the background
illumination to the surrounding light level.
The front mounted power switch is an all pole switch and controls both AC and DC power.
Position IN = Power ON.
Position OUT = Power OFF.
Front panel description
UTC
ADV.
YES REV. NO LIGHT -
LIGHT +
2
1
ALARM
POWER
RADIO
LINK
Output line monitor
LED:s
Control keyboard
Relay output control
switches
Status monitoring LED:s
Monitor Clock
Local Time Monitor Clock
UTC
Power switch