30
EN
3.8 - Balance
THIS
adjusts the audio compensation on 16 levels between the input channel and output channel (in order to eliminate
any possible Larsen effect). Press
to enable changes to the volume setting. Press the
and
buttons to
increase or reduce the volume. Press
to confirm the change.
Default = 8
3.9 - Chimes volume
THIS is the volume of the chimes attached to the electronic unit, which can be adjusted through 4 steps. Press
to enable changes to the volume setting. Press the
and
buttons to increase or reduce the volume. Press
to confirm the change.
Default = 0
3.10 - Lock interlock
Activation of the lock interlock enables operation of the lock only when the electronic unit is in call, conversation or
self-start status.
Press
1
to activate the interlock; press
0
+
to deactivate the interlock. Press
to confirm the change.
Default = No
3.11 - Enabling
R
ONE or more electronic units can be configured in such a way as to inhibit or enable lock release, F1 and F2 control
signals received from indoor units. Letter
D
is used to indicate the disabled status of Direct control signals transmitted
to the electronic unit. Letter C is used to indicate the enabled status of indirect control signals, i.e. activated at the
same time as others, for example the lock release of a different electronic unit (see lock / F1 / F2
C
ommon, paragraphs
4.4, 4.5, 4.6).
Use buttons
and
or the numeric keypad to select the identifier of the indoor unit to which to apply the enabling
and confirm with
. Once found, enter changes with
. Using buttons
1
to
6
MNO
enable the controls, see Table 8.
BUTTON
ACTION
1
Direct lock
2
ABC
F1 direct
3
DEF
F2 direct
4
GHI
Common Lock
5
JKL
F1 common
6
MNO
F2 common
Table 8
It is possible to set enabling and disabling simultaneously for all the indoor units, for one or more outputs. The proce-
dure is described below, but you should use the configuration software for a PC.
For the first digit to choose the indoor unit press
0
+
. The display will show the confirmation request.
The numeric keys now have the following meaning:
BUTTON
DISPLAY
DIRECT ACTION
COMMON ACTION
0
+
Nothing changes
Nothing changes
1
Sets to default the DIRECT
enabling of lock, F1, F2, ie
enables
all
Sets to default the COMMON
enabling of lock, F1, F2, ie
di-
sables
all
2
ABC
Sets to default the DIRECT
enabling of the lock, ie
enables
them
Sets to default the COMMON
enabling of the lock, ie
disables
them
3
DEF
Sets to default the DIRECT
enabling of F1, ie
enables
them
Sets to default the COMMON
enabling of F1, ie
disables
them
3.8
Balancing
3.9
Chime volume
3.10
Lock interlock
3.11
Enable-inhibit settings
