12
8.2 Rotary knob
Turning the knob clockwise or anticlockwise scrolls through the vari-
ous menu items and allows setting the parameters during the phase
of programming (temperature, date, time, etc.).
• If the timer-thermostat is working in Manual mode, turning the knob
changes the temperature setting.
• If the timer-thermostat is working in Automatic mode, turning
the knob accesses the procedure for setting the Automatic
Temperature Change (see par. 9.4.2).
In the other operating modes, turning the knob produces no effect.
8.3 Vertical sliders
Using the 22 sliders that are accessed by opening the front of the
device it is possible to:
- set the desired temperature when the timer-thermostat is on daily
Automatic mode;
- set the desired temperatures, for each hour and for each day of the
week, while configuring the weekly automatic program.
Slider adjustment has immediate effect when the timer-thermostat
is working on daily Automatic mode; if this is not the case, there
will be no change.
Take care that, if the operating mode is then switched over onto
daily Automatic mode, the temperature values will adjust to the
current position of the sliders.
Whereas, if operating in weekly Automatic mode, the timer-
thermostat will set the temperature values defined in the program-
ming phase and changing the sliders will not make any change
(unless, after opening the front, you confirm the intention to edit
the program).
Summary of Contents for 01911
