30
11.1 RESETTING THE TIMER-THERMOSTAT
If it is necessary to reset the device, which involves resetting the
default parameters and as a result losing all the configurations and
settings made, the procedure is as follows:
• remove the batteries from the device;
• press the
selection button;
• keeping the
, selection button pressed, insert the batteries,
waiting for the display to show
BUTTON REALASE
;
• release the
selection button and, using the rotary knob, select
RESET
;
12. MAIN CHARACTERISTICS.
• Power supply: 3 V d.c. with 2 penlight batteries AA LR6 1.5 V
(not provided)
• Battery life: over a year
• Output: relay with clean changeover contact 5(2) A 250 V~
• Type of setting: ON/OFF
• Possibility of radio-frequency connection to actuators 01923 and
01924 after replacing the relay module with the transmitter module
01921.1 (further information in the general catalogue)
• Updating the temperature displayed: every 5 s
• Room temperature display: 0 °C +40 °C
• Reading resolution: 0.1 °C
• Settings resolution: 0.1 °C
Figure 33
• astly press the
selection button to confirm; the display will
show
RESET OK
.
Summary of Contents for 01911
