4
VIEW IoT Smart Systems
VIEW Pro App for configuration
4. VIEW Pro App for configuration
The system is configured via the VIEW Pro App which, via the gateways, makes it possible to define devices, parameters and functions, as well as all the operations for diag-
nostics, maintenance and system monitoring both locally and remotely. The graphic interface of the App is extremely simple and straightforward, and during the various phases,
only the functions allowed for the current type of configuration are prompted; this will make operations quicker and minimise the risk of error.
The VIEW Pro App, when installed on tablet or PC, allows the Installer to configure the VIEW IoT smart systems integrated system and to programme the entire By-me
Plus subsystem, both locally and remotely.
Once installed on the smartphone, the APP allows you to view the systems configured and to perform certain basic operations on the gateways, including identification,
enrolment, firmware updating and backup.
4.1 Minimum hardware and software requirements
Hardware:
•
Tablet, smartphone and PC.
Software:
•
Android operation system ver. 5 and later.
•
iOS operation system ver. 10 and later.
•
Windows 10 operating system ver. 1809 and later for PC.
4.2 How configuration is done
Configuration can be done in two different ways depending on whether a WiFi router is present or not.
•
If a WiFi router or the Vimar Access point (art. 20195-19195-14195) is connected to the LAN line, configuration can be done from a tablet or PC (fitted with WiFi).
•
If on the other hand neither the WiFi router or the Access point are present, configuration can be done using a PC connected directly to the LAN line.
SYSTEM
Gateway
20195
19195
14195
LAN network
Router
CLOUD
Touch screen
* Switches art. 46260.5P.02 or 46260.10P.02 or 46260.16P.02 can be used.
SWITCH*
LAN network
