51
VIEW IoT Smart Systems
Webview
11. Webview
The Webview is the view of a web page, external to the VIEW App, which can be used to control a third-party system which is present and accessible in the same local network
as the Vimar system for reasons tied to fluidity and security of content use.
Thanks to this view, which is available by downloading an installation package onto the IP touch screens (art. 01420, 01422, 01425) connected to the Internet, you can interact
on third-party web pages.
Note
: The full use of the web page depends on the contents present in the page provided by the third-party system (whether this is a webserver or a web page) and on their
resolution, paired with the display of the IP touch screen on which the webview is enabled; the view can in fact be enabled on all IP touch screens and is therefore potentially
usable for displays measuring between 4.3’’ and 10’’. Correct viewing should therefore be tested in advance and assessed for every individual case by the user/installer configur-
ing the webview for the first time, relieving Vimar of any liability for any failures that may ensu
e.
There are also certain restrictions to the technology used by the source page which are illustrated in paragraph 11.3.
11.1 Configuration of a Webview
• From the "Customise" screen (
)" on the touch screen touch “Options” (
) and select “Webview management” (
).
• Select
; the Webview creation wizard is launched, where you should enter:
- the name associated with the Webview, which will then be displayed on the Home page;
- the link (URL) to the page that will be displayed (in the example: 192.168.1.10) and confirm using
;
- the icon associated with the Webview, to be selected to call up that view (for instance
).
