15
VIEW IoT Smart Systems
If synchronisation was unsuccessful for one or more devices, these will be marked with
(check the wired connection and if necessary reset it); then select "TRY AGAIN".
At the end of synchronisation, the App displays the screen for you to enter the time and date.
At the end of the operation, confirm with “SAVE".
Note:
If, after the pairing of the By-alarm gateway and synchronisation, importing of the XML file, the burglar alarm system may be used from the keypad or from the actuator
but not from the VIEW App or from the touch screens which will instead display the related notifications (for instance, system activated, alarm active, etc.).
Select
to display the list of systems (in this case only
will be present) paired with the installer.
When the system is marked with
this means it is only possible to connect remotely; if this is not the case, no connection can be made.
Select
to display the data identifying the system.
VIEW Pro App for configuration
