background image

NT-50906901-KSDR-ECOWATT-48-88-120-AN-170907

 

40/68 

ENGLISH

Time slot confi guration menu

A "reduced speed prg" table can 

also be seen; it includes the same 

information as for "normal speed 

prg"

Time settings

Time / Date

 Time: hh:mm

  Date: aaaa:mm:jj

  Weekday: jjjjjjj

Timer Normal  Normal speed

Normal speed

speed

Monday

Monday->Friday

Per 1: 00:00- 00:00 Per 1: 00:00- 00:00

Per 2: 00:00- 00:00 Per 2: 00:00- 00:00

Normal speed

Tuesday

Per 1: 00:00- 00:00

Per 2: 00:00- 00:00

Normal speed

Thursday

Per 1: 00:00- 00:00

Per 2: 00:00- 00:00

Normal speed

Friday

Per 1: 00:00- 00:00

Per 2: 00:00- 00:00

Normal speed

Normal speed

Saturday

Saturday->Holiday

Per 1: 00:00- 00:00 Per 1: 00:00- 00:00

Per 2: 00:00- 00:00 Per 2: 00:00- 00:00

Normal speed

Sunday

Per 1: 00:00- 00:00

Per 2: 00:00- 00:00

Normal speed

Holidays

Per 1: 00:00- 00:00

Per 2: 00:00- 00:00

The ranges are programmed 

either day by day or by a copying 

system by selecting either the 

same programming from Monday 

to Friday and/or the same on 

Saturdays and Sundays and 

holiday periods.

Holiday periods should be selected 

at the end of the table (24 periods 

are possible).

  2:  01:01  -  01:01

  3:  01:01  -  01:01

Time settings

Holidays

Holidays  (mm : dd)

  1:  01:01  -  01:01

  5:  01:01  -  01:01

  6:  01:01  -  01:01

Holidays  (mm : dd)

  4:  01:01  -  01:01

Summary of Contents for KSDR ECOWATT 08





































































Reviews: