NT-50906901-KSDR-ECOWATT-48-88-120-AN-170907
4/68
ENGLISH
1.2 Safety guidelines
• Make sure that you use the appropriate PPE (Personal Protective Equipment) before any handling
operation.
• Before installing the air handling unit, make sure that the support and location are resistant enough
to bear the weight of the unit and accessories.
• Observe with the danger labels present on the various access doors or panels:
• Electrical equipment/Rotating machine/Potentially fl ammable dust-laden fi lters:
FIRE DANGER
DIRTY FILTERS ARE
INFLAMMABLE
• Do not open the access doors until the electrical power has been cut from the padlockable switch
disconnecter located on the unit.
• If there is work to be performed on the device, cut the electrical power on the main circuit breaker
and make sure that nobody is able to accidentally restart it.
• Make sure that any mobile parts are stationary.
• Check that the plug fan is not accessible from the wiring spur line (wiring duct or steel mesh protec-
tion).
Before starting-up the device, check the following points:
• Make sure that the device does not contain any foreign bodies.
• Check that all the components are fastened in their original locations.
• Manually check that the fan does not scrape and is unblocked.
• Check the wiring of the earthing electrode.
• Check that the access lid is securely closed.
1.3 Receipt - Storage
In the event of any fault, non-conformity or total or partial breakdown of the delivered products, the Buyer
must issue its written reservations on the carrier's receipt in accordance with Article 133-3 of the French
Commercial Code and confi rm them within 72 hours by registered letter with a copy sent to VIM.
If the Buyer does not issue any reservations upon receipt, it may not take any subsequent action against
us.
The product must be kept out of bad weather and protected from any impacts and stains caused by any
projections of any kind during its transport from the supplier to the end client, and on the work site prior to
installation.
1.4 Warranty
The equipment supplied by VIM is under a 12-month warranty - Parts only - as of the invoice date. VIM
undertakes to replace any parts or equipment which are recognised as being faulty by our services, with
the exception of any damages or penalties such as operating losses, commercial damage or other moral
prejudice or indirect damages.
Our warranty excludes any faults related to any improper use or any use that is not in keeping with the
recommendations of our instructions, any fl aws observed following normal wear and tear, any incidents
caused by negligence, a lack of monitoring or maintenance or any faults due to a poor installation of the
devices or unsuitable storage conditions prior to assembly.
Under no circumstances may VIM be held responsible for any transformed or even any partially repaired
equipment.
