Villager VCPS 0820, Original Operating Instructions, Page: 33 / 234

9
Villager VCPS 0820 (EN)
3) PERSONAL PROTECTION
a) Stay alert, monitor what you are doing and use common sense while using the
power tool. Do not use the power tool if you are tired or if you are under the
influence of drugs, alcohol or medications
. A moment of carelessness while
using the power tool may lead to serious injury.
b) Always use personal protective equipment and protective goggles. The use of
protective equipment such as dust protection mask, anti-slip protective shoes,
helmet or ear protection under appropriate conditions will reduce the risk of
personal injury.
c) Avoid accidental starting. Make sure that the switch is in the OFF position
before connecting the device to the power supply or battery, and before
lifting or transporting the device
. Carrying the device with a finger on the
switch or connecting the device while the switch is in ON position may lead to an
accident.
d) Remove any adjusting tools (e.g. keys) before turning on the device. Key or
any other tool that is left on the rotating part of the device may cause serious
injury.
e) Do not stretch. Maintain appropriate stable stance and balance during work.
This allows for better control of the power tool in unexpected situations.
f) Dress accordingly. Do not wear loose clothes or jewelry. Keep your hair,
clothing and gloves away from moving parts.
Loose clothes, jewelry or long hair
- can get caught in the moving parts.
g) If it is possible to attach dust collecting equipment to the device, make sure
that such equipment is properly connected and used.
The use of such
equipment reduces the risk of accidents caused by dust.
4) USE AND MAINTENANCE OF THE POWER TOOL
a) The not overload the power tool. Use the power tool appropriate for the task.
The appropriate power tool will do the job better and safer, if used in the range
for which it has been designed.
b) Do not use the power tool if the switch does not turn on (ON) or off (OFF) in
the proper way.
Any power tool that cannot be controlled by a switch is
dangerous and has to be repaired.
c) Pull the plug out of the outlet and/or disconnect and remove the battery
before any adjustment of the device, replacement of accessories, or storage of
the device.
Such safety precautions reduce the risk of accidental starting of the
power tool.