Villager SILENT FORCE VAT 264/50, Original Operation Manual, Page: 23 / 138

5
MANUAL
GENERAL SAFETY INFORMATION
Since the air compressor and other components (material pump, spray guns, filters, lubricators,
hoses, etc.) used, make up a high pressure pumping system, the following safety precautions must
be observed at all times:
1. Read all manuals included with this product carefully. Be thoroughly familiar
with the controls and the proper use of the equipment.
2. Follow all local electrical and safety codes as well as in the US, National
Electrical Codes (NEC) and Occupational safety and Health Act (OSHA).
3. Only persons well acquainted with these rules of safe operation should be allowed to use the
compressor.
4. Keep visitors away and NEVER allow children in the work area.
5. Wear safety glasses and use hearing protection when operating the pump or
unit.
6. Do not stand on or use the pump or unit as a handhold.
7. Before each use, inspect compressed air system and electrical components for
signs of damage, deterioration, weakness or leakage, Repair or replace defective items before using.
8. Check all fasteners at frequent intervals for proper tightness.
Motors, electrical equipment and controls can cause
electrical arcs that will ignite a flammable gas or vapor,
Never operate or repair in or near a flammable gas or vapor, Never store flammable
liquids or gases in the vicinity of the compressor.
Compressor parts may be hot even if the unit is stopped.
9. Keep fingers away from a running compressor, fast moving and hot parts will cause injury and/or
burns.
10. If the equipment should start to abnormally vibrate, STOP the engine/motor and check
immediately for the cause, vibration is generally a warning of trouble.
11. To reduce fire hazard, keep engine/motor exterior free of oil, solvent, or excessive grease.
Never remove or attempt to adjust safety valve. Keep safety valve free from
paint and other accumulations.
Never attempt to repair or modify a tank! Welding, drilling or
any other modification will weaken the tank resulting in damage from rupture or
explosion. Always replace worn or damaged tanks.
Drain liquid from tank daily.