Villager JGP 1100 F, Original Instructions Manual, Page: 14 / 95

5
Villager JGP 1100 F (GB)
Filling and suction
1.Unscrew the pump cover.
2.The pump shall be filled with water completely.
3.Install the filter again and screw the pump cover and sealing
elements.
4.When it is necessary to shorten the suction time, please fill in
the suction hose.
5.Open the pressure pipeline (faucet or nozzle) to make the air
escape during the intake process.
6.Switch on the equipment.
7.Switch off the equipment when water is exhausted evenly.
8.Clean the filter after use.
MAINTENANCE
1. Please disconnect the power supply before any operation of maintenance.
2. The equipment will only fulfill the maintenance and trouble removal tasks as
specified in the instructions. Other faults shall be removed by experts.
3. Please apply the original components. Only these replaceable components are
specifically designed and produced for the equipment. When other components
are replaced, the warranty will be invalid and you and your environment are likely
to be endangered.
FAULT AND REMEDIAL MEASURES
In most cases, you will be able to troubleshoot problems easily by yourself. Before
you contact us, please refer to the following table for technical support. This will
help you save a lot of work and possible expenses.
If you are unable to remove the faults, please contact with the local suppliers
directly. Please remember that the repairing of laypeople will invalidate your
warranty and claims for compensation and give rise to the extra costs.
Risk for electric shock!
Please disconnect the power supply before any operation of
equipment.
Danger!
Attention:
Danger type and source!
All gaskets shall be renewed when components are dismantled.