10
Programming Features Index
DESCRIPTION
Section
Page
Connect/Disconnect
A
8
Phone Numbers
1
11
Unit Name
2
11
Mute Current / Next Alarm
3
11
Phone Firmware
4
11
IP Firmware
5
11
Import/Export
6
11
Clear Phone settings
7
11
Clear IP Settings
8
11
Diagnostics (used to check relay status and operation)
9
11
Security code (factory set to 845464)
10
12
Access Code (1-6 digits, blank = disabled, factory set to 123456)
11
12
Inbound Call Mode (Disabled, Auto Answer, Auto Answer Secure, Ring-Low, Ring-High, Silent Monitor & Silent Monitor
Secure) (factory set to Auto Answer)
12
12
Ring Cadence (factory Set to Normal Ring)
13
12
Relay Mode (Door Strike, Outbound Call, In/Outbound Call, Doorbell, Alarm Mode, Ring, Ring Flash, factory set to Door
Strike)
14
13
Relay Activation Command (1 or 2 digits, factory set to
) (Relay Mode must be set to Door Strike)
15
13
Relay Activation Time (0.5 - 99 sec, factory set to 5 sec)
16
13
Relay Int/Ext (factory set to Internal)
17
13
Relay Latch Commands (Enabled or Disabled, factory set to Enabled)
18
13
In-Band Audio Call Progress (Enabled or Disabled, factory set to Enabled)
19
14
In-Band Audio Detect Sensitivity (1-9, 1 = min, 9 = max, factory set to 5, power cycle unit after setting)
20
14
Call Length Time Out (disabled or 1 to 9 min, factory set to 3 min)
21
14
Dial Next # on Ring No Answer (disabled, 1 - 9 = number of rings, factory set to 7)
22
14
Dial Next # on Busy (disabled or enabled, factory set to enabled)
23
14
Off Hook Dialing Delay (No Delay or 1-6 seconds, Factory set to 3)
24
14
Handset Default Volume (1-4, fixed at 1-4 or last used, factory set to 1)
25
14
