keypad will remain lit as a reminder that Showroom Mode is still activated. To repeat the Show Room
Mode, simply open and close the doors momentarily to cycle the compartment lights on for another 15
minute period.
To escape from “Show Room” mode repeat the activation process.
2.1.9 Black Out Mode
This is an automatic function and simply means that when the door is closed, the display readouts and the
compartment lights turn off. Display lighting is the exception.
2.1.10 Sabbath Mode
To activate the Sabbath Mode, press and hold the “Set” keypad while pressing the ˚F/C keypad four (4)
times within seven (7) seconds. The display will flash “SA” seven (7) times before the displays black out.
The display, audible alarms, message center, and lights will be disabled at this time. Although in Sabbath
Mode, the wine cellar will still operate randomly. The Sabbath Mode automatically times-out in 72 hours.
To exit the Sabbath Mode simply repeat the same procedure used to enable.
2.1.11 Door Ajar Alarm
When the TruProtect™ system is enabled an audible alarm will sound three (3) times every 30 seconds and
the message center will display an amber “Door Ajar” alarm.
2.1.12 High/Low Temperature Alarm
When the TrueProtect™ system is enabled an audible alarm will sound six (6) times every minute and the
message center will display a red “Hi/Low Temp Upper” or a red “Hi/Low Temp Lower” alarm.
It is a normal condition if the alarm occurs when changing set-points in excess of 10˚F and/or high usage.
2.1.13 Power Failure Alarm
When the Truprotect™ system is enabled the message center will display an amber “Power Failure” alarm
if power has been interrupted to the unit. No audible alarm is heard.
This is normal at initial start-up as the wine cellar was operated for quality checks at the factory.
2.1.14 Reset Alarms
To reset the Door Alarm, simply close the door of the unit. For all other alarms press the “On/Off” keypad.
Although the alarms have been reset, the alarm will still resume if the condition has not been corrected.
8
2010 - Viking Preferred Service
SMR-0005
Summary of Contents for DFUW244CL
