Power:
5 to 14V DC @ 60mA maximum
Maximum Cable Length:
500 ft 24 Awg stranded shielded
(Belden 9537)
Frequency:
125KHz
Format:
26 bit Wiegand
Read Range:
1.25” to 2.0”
Technologies Supported:
Viking
PRX-C
,
PRX-C-ISO
,
PRX-FOB
,
LRT-4
, certain legacy HID® proximity protocols*
and certain AWID 125Khz proximity protocols**
Transducer:
Beeps during card read
LED:
Red, turns off during card read
Humidity:
Up to 100% (fully potted EWP)
Operating Temperature:
-34° C to 65° C (-30° F to 150° F)
* HID and the HID logo are registered trademarks of HID
Global Corporation, an ASSA ABLOY company. All other
trademarks are the property of their respective owners.
** AWID is a trademark of Applied Wireless Identification Group.
Proximity Card Reader Specifications
Fea tures Overview
Keypad:
Push to initiate call,
push again to disconnect. Zinc
Die cast with Satin Chrome
Finish, internally sealed per
IP67.
Speaker Screen:
Speaker
screen with 0.018" wide slots
to prevent punctures from
paperclips, etc.
Faceplate Material:
14 gauge
316 stainless steel with #4
brushed finish.
Speaker:
Mylar speaker with
rubber gasket to maintain
water-tight seal and eliminate
water deterioration.
Blue Call LED:
Lights steady
to help locate the button in low
light.
Microphone:
Omni-directional
microphone with protective
water-resistant cloth.
Front View of the
K-1270 Entry Phone
Condensation Drain Hole
Mounting Screws:
(8) 6-32 X
3/4” Marine grade 316
stainless steel, flat head, T-10
Torx security screws and drive
bit (included).
Laser Etched Graphics:
For
long lasting easy to read
graphics.
VIKING
©
1
2
3
4
5
6
7
8
9
0
#
*
#
*
0
9
8
7
6
5
4
3
2
1
1
2
3
4
5
6
7
8
9
0
#
*
Proximity Card Reader:
26-bit Wiegand, 125KHz, red
LED turns off and transducer
will beep during card read.
Fully potted EWP. Read range
1.25" to 2.0". Impact resistant
polycarbonate lens with
water-tight gasket.
2
