manualshive.com logo in svg

Viglen CX135, User Manual, Page: 71 / 93

Share
Download
Viglen CX135 User Manual Download Page 71

Viglen CX135 User Guide – Version 1.0 

70

The default settings are: 
 
1st boot device – Floppy Drive 
 
2nd boot device – S1 MPI Boot Support 
 
3rd boot device – SATA0-#0 Mirror 
 
4th boot device – IBA GE Slot 0508V 
 
5th boot device – IBA GE Slot 0510V 
 

Hard Disk Drives 

 

This feature allows the user to specify the Boot sequence from available Hard 
Drives.

 

 

1st Drive/2nd Drive/3rd Drive

 

 

Specify the boot sequence for 1st Hard Drive, 2nd Hard Drive, and 3

rd

 Hard Drive. 

The options are HDD and Disabled. 
 

Removable Drives 
 

This feature allows the user to specify the Boot sequence from available Removable 
Drives. 
 

1

st

 Drive 

 

Specify the boot sequence for 1st Removable Drive. The Options are 

1

st

 Floppy 

Drive 

and Disabled. 

 

CD/DVD Drives 

This feature allows the user to specify the boot sequence from available CDROM 
Drives. 

 
1st Drive 

Specify the boot sequence for 1st Hard Drive. The options are 

CD ROM 

and 

Disabled. 
 
 
 

 

 
 

 

 
 

 

Summary of Contents for CX135






























































































Reviews:

No comments