manualshive.com logo in svg

Viglen CX135, User Manual, Page: 65 / 93

Share
Download
Viglen CX135 User Manual Download Page 65

Viglen CX135 User Guide – Version 1.0 

64

ACPI Configuration 

 

This item allows the user to enable or disable ACPI support for the operating system. 
 

ACPI Configuration 
 

Use this feature to configure additional ACPI options. Select "Yes" if the operating 
system supports ACPI. Select No if the operating system does not support ACPI. 
The options are No and 

Yes

. 

 
 

ACPI 2.0 Features 
 

Select Yes to allow RSDP pointers to point to the 64-bit Fixed System 
Description Tables. Select No to deactivate this function. The options are Yes 
and 

No

. 

 

ACPI APIC Support  
 

Select Enabled to allow the ACPI APIC Table Pointer to be included in the 
RSDP pointer list. The options are 

Enable

, and Disabled. 

 

AMI OEMB Table 

 

Select Enabled to allow the OEMB Table Pointer to be included in the 
R(x)SDT pointer lists. The options are 

Enabled

, and Disabled". 

 

Headless Mode 
 

Select Enabled to activate the Headless Operation Mode through ACPI. The 
options are Enabled, and 

Disabled

. 

 

Power Configuration 

 

This feature allows the user to configure PnP settings. 
 

Restore on AC Power Loss 
 

This setting allows you to choose how the system will react when power returns after 
an unexpected loss of power. The options are Stay Off, Power On and 

Last State

. 

 
Watch Dog Timer 
 

This setting is used to enable or disabled the Watch Dog Timer function. It must be 
used in conjunction with the WD jumper (see Chapter 2 for details). The options are 

Disabled 

and Enabled. 

 

Summary of Contents for CX135






























































































Reviews:

No comments