manualshive.com logo in svg

Viglen CX135, User Manual, Page: 62 / 93

Share
Download
Viglen CX135 User Manual Download Page 62

Viglen CX135 User Guide – Version 1.0 

61

PCI IDE BusMaster 
 

Set this value to allow or prevent the use of PCI IDE busmastering. Select "Enabled" 
to allow AMI BIOS to use PCI busmaster for reading and writing to IDE drives. The 
options are "

Disabled

" and "Enabled". 

 

Offboard PCI/ISA IDE Card 
 

This option allows the user to assign a PCI slot number to an Off-board PCI/ISA IDE 
card in order for it to function properly. The options are: 

Auto

, PCI Slot1, PCI Slot2, 

PCI Slot3, PCI Slot4, PCI Slot5, and PCI Slot6. 
 

IRQ3/IRQ4/IRQ5/IRQ7/IRQ9/IRQ10/IRQ11/IRQ14/IRQ15 
 

This feature specifies the availability of an IRQ to be used by a PCI, PnP device. 
Select Reserved for the IRQ to be used by a Legacy ISA device. The options are: 

Available

, Reserved. 

 

DMA Channel 0/Channel 1/Channel 3/Channel 5/Channel 6/Channel 7 
 

Select Available to indicate that a specific DMA channel is available to be used by a 
PCI/PnP device. Select Reserved, if the DMA channel specified is reserved for a 
Legacy ISA device. 
 

Reserved Memory Size 
 

This feature specifies the size of memory block to be reserved for Legacy ISA 
devices. The options are: 

Disabled

, 16K, 32K, 64K. 

 

Super IO Configuration Sub-Menu 

 
Serial Port Address 
 

This option specifies the base I/O port address and Interrupt Request address of 
serial port 1. Select "Disabled" to prevent the serial port from accessing any system 
resources. When this option is set to 

Disabled

, the serial port physically becomes 

unavailable. Select "3F8/IRQ4" to allow the serial port to use 3F8 as its I/O port 
address and IRQ 4 for the interrupt address. The options are Disabled, 

3F8/IRQ4

, 

3E8/IRQ4, 2E8/IRQ3. 
 

Serial Port2 Address 
 

This option specifies the base I/O port address and Interrupt Request address of 
serial port 2. Select "Disabled" to prevent the serial port from accessing any system 
resources. When this option is set to "Disabled", the serial port physically becomes 
unavailable. Select "2F8/IRQ3" to allow the serial port to use 2F8 as its I/O port 
address and IRQ 3 for the interrupt address. The options are Disabled, 

2F8/IRQ3

, 

3E8/IRQ4, 2E8/IRQ3. 

Summary of Contents for CX135






























































































Reviews:

No comments