Viglen CX135, User Manual, Page: 41 / 93

Viglen CX135 User Guide – Version 1.0
40
NIC2 LED
The NIC (Network Interface Controller) LED connections for the GLAN port1 is
located on pins 11 and 12 of JF1, and the GLAN port2 is located on pins 9 and 10 of
JF1. Attach the NIC LED cables to display network activity. See the table below,
Overheat LED (OH)
Connect an LED to the OH connection on pins 7 and 8 of JF1 to provide advanced
warning of chassis overheating. Refer to the table below for pin definitions.
Power Fail Button
The Power Fail Button connection is located on pins 5 and 6 of JF1. Refer to the
table below for pin definitions.
Reset Button
The Reset Button connection is located on pins 3 and 4 of JF1. Attach it to the
hardware reset switch on the computer case. Refer to the table below for pin
definitions.