Document: LT0554
Vigilant BOWS Installation & Operation Manual
Issue 1.20
6 September 2012
Page 1-3
Figure 5.
A4485 Paging
Console
Figure 6.
BOWS fitted with the
Zone Select switch
The BOWS supports zone selectable paging using the A4485 4-Zone
Paging Console (see Figure 5).
For this paging option the
FP1023 BOWS ZONE PAGING KIT
is
required.
This kit includes the following items:
-
SDM-4 Speaker Distribution Module
-
SDM-4 mounting bracket & screws
-
A4485 4 zone paging console
-
Connectors and wire (excluding CAT5 cable)
-
BOWS Zone Paging Kit Installation Guide (LT0558)
It addition to the FP1023 kit you will also require a suitable
length of standard CAT5 (Ethernet) cable terminated with
RJ45 connectors for connecting the paging console to
the BOWS. This cable can be up to 300m in length.
Refer to the BOWS Zone Paging Kit Installation Guide
(LT0558) supplied with the kit for further details.
The BOWS supports zone selectable paging using the Emergency PA
Microphone.
For this paging option the
FP1024
EMERGENCY MIC ZONE PAGING KIT
is
required.
This kit includes all the required parts
including:
-
SDM-4 Speaker Distribution Module
-
SDM-4 mounting bracket & screws
-
Zone selector switch
-
Panel label
-
Connectors and wire
-
BOWS Zone Paging Kit Installation
Guide (LT0558)
Note that the zone selector switch and label are mounted on the
3U blank panel of the BOWS (see Figure 6) and two holes (4mm
& 10mm dia) must be drilled in this panel by the installer to mount
the switch.
Refer to the BOWS Zone Paging Kit Installation Guide (LT0558)
supplied with the kit for further details.
Zone Paging
Console
Zone Paging
Using the
Emergency PA
Mic