Vigilant BOWS Installation & Operation Manual
Document: LT0554
Page
6 September 2012
Issue 1.20
3-4
An 8-way DIP switch (SW1) and 7 jumpers are used to configure the
operation of the T-GEN 50.
Figure 12. T-GEN 50
The T-GEN 50 has 3 level adjustment controls as shown in Table 6.
Table 6. T-GEN 50 Level Controls
Control
Name
Function
VR1
BIAS
Amplifier Bias
– Factory adjust
only.
VR2
SPEECH
VOL
Volume adjustment for recorded
messages.
VR3
PA VOL
Volume adjustment for emergency
PA microphone.
Note that the BIAS (VR1) level must not be adjusted.
T-GEN 50
(Master)
Level
Controls
SW1 Configuration
Switch
LK4 Test Link
Play Button
LK3 Record
Enable Link
