6
INSTALLATION PROCEDURE
1-
Determine the quantity of nuts or bolts in the
hub.
2-
Assign a number to each one, with # 1
corresponding to the one in the highest position;
continue clockwise numbering the rest (Fig. 9).
The following table shows all possible hub clamp
nut or bolt quantities in the first column. With
this information, determine which nuts or bolts
will be replaced.
Hub nuts or
bolts quantity
Nut or bolt numbers
to be replaced
3
1-2-3
6
1-3-5
9
1-4-7
12
1-5-9
15
1-6-11
3-
Replace the nuts or bolts specified in the second
column of the table by the stud bolts provided
with the system (Fig. 10).
4-
With a compass, measure the distance between
the centres of two stud bolts (Fig. 11).
Fig. 10
Fig. 9
Fig. 11
