18
1.
Fully screw the tightening nut to the bend.
2.
Insert the plastic washer as shown in the drawing.
3.
Screw the bend into the rotor cover until the plastic
washer makes contact with the rotor cover’s end.
4.
Screw the stainless steel spring to the bend’s open end.
The stainless steel spring has a bigger diameter on
one end – Use this end to connect to the bend.
5.
Insert a second steel spring to the stainless steel pipe.
Use the spring’s smaller diameter end to connect to the stainless steel pipe.
6.
Screw and tighten the nipple for body coupling to the body
coupling.
BODY COUPLING
NIPPLE FOR
BODY COUPLING
