Configuring Client Settings
Configuring Network Settings
77
4.5.3 Configuring Wired Network Settings
The
Ethernet
setting enables you to configure the wired network settings for your SC-T35 thin client.
Using a Dynamic IP Address
To use a dynamic IP address, please do the following:
1. On ViewSonic Client Setup, click
Network
>
Ethernet
.
2. Under the IP address section, click the drop-down menu to select
DHCP
for the IP type field.
NOTE
•
If
DHCP
is selected, the DHCP server over the network will automatically assign
an IP address to your SC-T35 thin client. This is the default setting.
3. Click
Save
to apply.
Using a Static IP Address
To use a static IP address, please do the following:
NOTE
•
It’s recommended to use a dynamic IP address for your SC-T35 thin client in a
corporate network environment.
1. On ViewSonic Client Setup, click
Network
>
Ethernet
.
2. Under the IP address section, click the drop-down menu to select
Static IP
for the IP type field.
3. The IP address, Subnet mask, and Gateway fields appear in the IP address section.
Summary of Contents for SC-T35
Page 1: ...SC T35 Thin Client User Guide Model No VS15164...
Page 198: ......
