ViewSonic SC-T35 User Manual Download Page 52

Page: 52 / 198

Configuring Client Settings

Configuring System Settings

4.2.6 Updating Firmware from the Management Computer

Update Firmware

allows client users to update firmware from its management computer.

NOTE

•

Ensure that your SC-T35 has been added into a managed group under ViewSonic

Device Manager installed on a remote computer, and that you have imported client

firmware files into ViewSonic Device Manager. These are prerequisites of this feature.

•

For more information on firmware update and ViewSonic Device Manager, please

refer to the User Manual for ViewSonic Device Manager.

To update firmware from the management computer, please do the following:

1. On ViewSonic Client Setup, click

System

Firmware Update

2. Under the Firmware Update section, click

Check Firmware

3. Upon completion, a window appears notifying you that the Firmware list has been loaded.

4. Click

Yes

to continue.

Summary of Contents for SC-T35







































































































































































































Search results

Summary of Contents for SC-T35

Reviews:

Related manuals for SC-T35

Brands by name

Popular brands

ViewSonic SC-T35, User Manual

Search results

Summary of Contents for SC-T35

Reviews:

Related manuals for SC-T35

Brands by name

Popular brands