Configuring Client Settings
Configuring System Settings
43
4.2.7 Enabling or Disabling the Appliance Mode
The Appliance mode allows your SC-T35 to start up directly with the desired Microsoft Remote Desktop, Citrix ICA,
VMware View or Horizon View session. Under the Appliance mode, users will feel as if they were using a standalone
desktop computer; the underlying client operating system, ViewSonic ARM Linux, is hidden from the very
beginning.
NOTE
•
There are three similar but different modes for your SC-T35 and only one mode
will take effect if all are enabled. Three modes and the order of priority are
listed as follows:
No.
Mode
Description
1
Appliance
The client will start up directly with the desired
RDP / ICA / View session and turn off after
existing the session.
2
Autostart
The client will start up directly with the desired
RDP / ICA / View session and perform the
configured action after existing the session.
Available actions include:
•
Returning to the local desktop
•
Re-launching a new session
•
Restarting the thin client
•
Turning off the thin client
3
Quick Connection
The default.
The client will enter ViewSonic
Quick Connection screen after system startup.
•
For more information on these modes, please refer to sections:
4.2.8 on page 47 and 3.1 on page 14 (Quick Connection mode)
4.2.7 on page 43 (Appliance mode)
4.6.5 on page 111 (Autostart mode for RDP sessions)
4.6.8 on page 145 (Autostart mode for ICA sessions)
4.6.11 on page 172 (Autostart mode for View sessions)
Enabling the Appliance Mode
To enable the Appliance mode, please do the following:
NOTE
•
Ensure that you have configured the connection settings for the desired Microsoft
Remote Desktop, Citrix ICA, VMware View or Horizon View session under
Applications
tab. You need to specify which service type and connection settings
entry will be used under the Appliance mode. For detailed instructions, please see
sections:
”4.6.3 Configuring Basic RDP Connection Settings” on page 96
“4.6.6 Configuring Basic ICA Connection Settings” on page 125
“4.6.9 Configuring Basic VMware View Connection Settings” on page 168
Summary of Contents for SC-T35
Page 1: ...SC T35 Thin Client User Guide Model No VS15164...
Page 198: ......
