20
Osprey-300 User’s Guide
5. Click Yes to accept the End User
Software Agreement. If you do not
wish to accept the agreement, click No
to terminate the installation routine.
The Information window displays.
6. Click Next. The Osprey-300
Driver window appears.
7. Click the radio button to select
the default signal format (fi gure
1). See Video Standard for more
information about signal formats.
8. Click Next. The Choose Destination
Location window displays.
9. If you wish to change the destination
location for the fi les, click Browse.
10. Click Next. The Start Copying
Files window displays.
11. Click Next. The Pre-installation
question window displays (fi gure 2).
12. Click Yes. The Software Installation
window displays (fi gure 3).
13. Click Continue Anyway. (This window will
only be displayed on drivers that have
not been WHQL Certifi ed; WHQL Certifi ed
drivers will skip this step). The fi les begin
copying to the computer. The ViewCast
Corporation/Osprey Video Division Special
Offers Shortcut window displays.
14. If you would like a shortcut installed on
your desktop, click Yes and a shortcut
is created on the desktop. If not, click
No. Once you have made your choice,
an information window displays.
15. Click OK to continue the installation. The
AVStream User Manual window displays.
16. If you would like to view the AVStream
User Manual, click Yes and an Acrobat
Reader window opens. If not, click No.
17. Once you have made your choice, click OK.
The Product Registration window displays.
18. If you would like to register your
Osprey-300 Capture card, click Yes
and a browser window will open with
a registration page. If not, click No.
Once you have made your choice, the
Setup Complete window displays.
19. Click Finish to complete the installation.
The Osprey-300 Setup window
1
The Pre-installation question window
2
The Software Installation window
3
Summary of Contents for Osprey-300
Page 1: ...Osprey 300 User s Guide...
