1.
Flip up control unit
A
.
2.
Release four wing nuts and remove
fan unit
B
. Check the gasket for
tight fit and condition.
3.
Clean impeller
C
with spatula.
Vacuum fly ash from the impeller,
lid and fan box.
4.
Lift the fan box
D
at the front and
lift out.
5.
Cleaning the flue pipe.
6.
Vacuum the upper area of second-
ary heating surface
E
.
7.
Assemble in reverse order.
Note
Tighten the wing nuts diagonally.
4. Induced draught fan and secondary heating surface
13
Inspection and maintenance
5692
618
GB
Summary of Contents for Vitolig 300
