16
If you change the access code, the Vitocom 100 sends
an SMS with the new code to the mobile phone num-
bers "mobnr1" and "mobnr2" (if programmed).
Example:
Changing the access code from "1111" to "1234",
for example.
SMS from the user
1111
þ
code
þ
1234
Reply SMS from the Vitocom 100
1234 CODE 1234 OK
Note
If you have forgotten your access code, you can check
it with the SMS command "password" (page 25).
Deleting previous entries
SMS command
Meaning
reset 0
Restart
the Vitocom 100.
Set parameters will not be deleted
reset 1
All settings are returned to their delivered condition,
except PIN code
.
Note
The Vitocom 100 does not send a reply SMS following
a "reset" command.
Example:
Deleting all previous entries, except the SIM card PIN
code
SMS from the user
1111
þ
reset
þ
1
Example:
Afterwards, send a new commissioning SMS to the
Vitocom 100 (see page 20).
During recommissioning, test the automatic notification
by SMS to the programmed mobile phone numbers
"mobnr1" and "mobnr2". Repeat this test at regular
intervals to be on the safe side.
Reinstating the delivered condition
Hold down reset button "T4" for at least 30 seconds
(see page 10).
The Vitocom 100 is completely reset into the delivered
condition. The PIN is also deleted. The Vitocom 100
has to be completely recommissioned.
During recommissioning, test the automatic notification
by SMS to the programmed mobile phone numbers
"mobnr1" and "mobnr2". Repeat this test at regular
intervals to be on the safe side.
Further SMS commands
Changing the access code
(cont.)
5782 277 GB
