background image

22

Example:

SMS from the user

1111

þ

aktdat

þ

11.02.2015

Reply SMS from the Vitocom 100

1111 AKTDAT 11.02.2015 OK

Example:

Message in the case of incorrect input:
The current date "aktdat" that has been entered is later
than the end date "enddat".
The Vitocom 100 sends the following SMS alert:

SMS alert as error message

1111
ENDDAT 10.02.2015 ERROR
AKTDAT 11.02.2015 ERROR

Entering information texts

Information texts serve to name the heating system or
the appliances connected via the digital input. These
texts are sent by SMS for clear assignment, e.g. within
a fault message.

The text input is limited to 

30 characters

, longer texts

will be trimmed.

"info"

Naming of your heating system (e.g. name of the sys-
tem operator, location of the system).

Example:

Entering the word "Heating system"

SMS from the user

1111

þ

info

þ

Heating system

Reply SMS from the Vitocom 100

1111 INFO Heating system OK

Note

For scanning, see page 25.

"ditext"

Naming of the appliance connected to the digital input
or its function

Example:

Monitoring the fuel oil level

SMS from the user

1111

þ

ditext

þ

Low oil level

Reply SMS from the Vitocom 100

1111 DITEXT Low oil level OK

Note

For scanning, see page 25.

Device settings

Entering the current date

 (cont.)

5782 277 GB

Summary of Contents for Vitocom 100

































Reviews: