Viessmann Vitocal 350-G, Installation And Service Instructions For Contractors

Page: 80 / 92

80
Parameter Code Delivered condition Commission-
ing
Maintenance/
service
Flow rate nominal ventilation 7D0B
■
Vitovent 200-C:
115 m
3
/h
■
Vitovent 300-F:
170 m
3
/h
Flow rate intensive ventilation 7D0C
■
Vitovent 200-C:
155 m
3 /h
■
Vitovent 300-F:
215 m
3 /h
Min. supply air temperature for bypass 7D0F 160 (
≙
16 °C)
CO2 value for raising the flow rate 7D18 800 ppm
Humidity value for raising the flow rate 7D19 65 %
Interval time frost protection ventilation 7D1A 15 min
Intensive ventilation duration 7D1B 120 min
Actual source room temperature 7D1D 1
Heating circuit for blocking bypass damper 7D21 7
Control voltage matching 7D27 0 (
≙
0 V)
Fan for control voltage matching 7D28 0
Strategy, passive frost protection 7D2C 0
Type of heat exchanger 7D2E 0
Installation position 7D2F 0
Function, external 230 V input, ventilation 7D3A 0
Duration, bathroom vent. 7D3B 30 min
Starting block, ventilation periods part 1 7D5E 0
Starting block, ventilation periods part 2 7D5F 0
Control voltage matching, supply air fan 7D71 0 V
Control voltage matching, exhaust air fan 7D72 0 V
Sensor matching, outdoor air temperature 7D75 0 K
Sensor matching, outdoor air temp after pre-
heating coil 7D76 0 K
Sensor matching, supply air temperature 7D77 0 K
Sensor matching, extract air temperature 7D79 0 K
Ventilation: Vitovent 200-W, Vitovent 300-C and Vitovent 300-W
Parameter
Code Delivered condition Commission-
ing
Maintenance/
service
Vitovent enable 7D00 0
Heating circuit for blocking bypass damper 7D21 7
Preheater coil C101 1
Reheater coil C102 0
Humidity sensor C105 0
Set CO2 value C106 0
Set room temperature C108 220 (
≙
22 °C)
Background ventilation C109
■
Vitovent 200-W:
15 %
■
Vitovent 300-C:
30 m
3 /h
■
Vitovent 300-W:
50 m
3
/h
Commissioning/service reports
Control parameter report
(cont.)
5855006
Appendix