Viessmann KOB PYROTEC Technical Manual Download Page 18

Page: 18 / 88

3.4 Accessories for Pyrocontrol remote transfer

Fault message device, analogue with battery

Part no. 7387 840

Transmission of fault messages of boiler system either as SMS on a
mobile or as a fax. Four different text messages are possible, as the
fault message modem has four independent digital inputs.

Standard delivery:
■ Analogue modem in control panel
■ Battery station (also works in the event of a power failure)

To be carried out on the customer side:
■ Electrical connection of the phone line to the modem
■ Configuration in accordance with the documentation

Export of operating data

Part no. 7387 890

Issue of relevant boiler system operating data and fault messages as
ASCII dataset via serial interface to higher control technology on the
customer side. All selectable parameters can be changed by higher
control technology if this is planned by control technology.

Standard delivery:
■ Interface at the control panel
■ Software module
■ MOD BUS report (Baud rate 9600)

Note
Additional fault message device, analogue with battery station
[ECO-SME / 7387994] possible
Additional visualisation, wired [ECO-SVD] or wireless [ECO-SVG /
7388003], not possible

Visualisation, externally via modem (connected with cable)

Part no. 7387 997

Package for the transmission of relevant data to an EDP workstation
(internal and/or external) for the visualisation, remote maintenance
and operating data archiving of the PYROTEC boiler system. Hard-
ware and software are integrated into the Pyrocontrol control unit. All
selectable parameters can be changed from the EDP workstation.

Standard delivery:
■ Industrial PC with interfaces for screen, keyboard and PC mouse for

EDP – workstation close to boiler room

■ Analogue modem in control panel
■ Windows operating system, remote maintenance software pcAny-

where and visualisation/archiving software installed and tested on
the industrial PC.

Images on the screen:
■ Cross-section image of boiler, 3D with display fields
■ Installation scheme for heat source with display fields
■ Table of parameters (with change option)

To be carried out by customer:
■ It is the responsibility of the customer to organise the EDP worksta-

tion for remote maintenance together with modem, and installation
of pcAnywhere and modem independently.

Note
Additional fault message device, analogue with battery station [ECO-
SME / 7387994] possible
Also, export of operating data [ECO-SED / 7388038] not possible

Visualisation, internal

Part no. 7387 902

With a data line (max. 30 m) to the PC, all data is fed via the serial
interface RS 232 at the programming module to the PC. The current
operating data for the boiler system is shown visually on a function
screen with all options for inputting values and functions and reading
out the operating conditions (exception "Start boiler"). All operating
data is archived cyclically and can be evaluated graphically in an
extremely simple way. PC and data line are not included in the price.

Note
The PC and data line are not included in the price.

Standard delivery:
■ CD with visualisation software and installation instructions

Note
Requirements for on-site PC:
Operating system Windows 98 / 2000 / XP
Free hard disk memory at least 50 MB
At least 128 MB RAM
Per boiler 1 free serial interface

Data line to internal visualisation

Part no. 7379 404

Data line comprising:

■ D-SUB connector for connection between programming module and

data line, soldered

■ 30 m data line 3–pole (cut to length as required on site)
■ D-SUB connector with threaded fittings 9–pole for connection to the

Control unit

(cont.)

PYROTEC

5822 511 GB