Vitodens 200-W B2HB 19 to 35, 68 to 125 Installation
57
5461 884 - 14
10. Set front enclosure panel on the guide rails and
push in place.
11. Tighten screws at the bottom.
12. Insert the external accessories connection box
cover in place.
IMPORTANT
Read and follow, where applicable, the safety instructions
of all labels and stickers attached to boiler surfaces. Do
not remove any of these instructions. Contact Viessmann
if any replacement labels are required.
Reinstalling the Front Enclosure Panel
Note:
Ensure the locking screws are fitted before
operating.
Instructing the system user
The system installer should hand the operating
instructions to the system user and instruct the user
in operating the system.
Control Connections
Closing the External Accessory Connection Box
(continued)
8. Tighten the external accessory connection box
retaining
screw.
9. Install the external accessory connection box cover
screws.
