80
Commissioning the system
Commissioning (configuration, parame-
ter settings and function checks) can be
carried out with or without the commis-
sioning assistant (see following chapter
and service instructions for the Vitotronic
200 heat pump control unit).
Note
Type and extent of parameters depend
on the heat pump type, on the selected
system scheme and the accessories
employed.
Commissioning with the commissioning wizard
The commissioning wizard guides you
automatically through all the menus
where settings have to be made. For
this, "Coding level 1" is automatically
active.
!
Please note
Incorrect operation at
"Coding level 1" may result in
damage to the appliance and the
heating system.
Always observe the separate
service instructions of the
Vitotronic 200 heat pump control
unit, otherwise the appliance will
no longer be under warranty.
Switch on the ON/OFF switch on the
heat pump control unit.
■ The prompt
"Start commission-
ing?"
appears
automatically
on first
commissioning.
Note
The commissioning wizard can also be
started manually:
To do this, when you switch on the
heat pump control unit (progress bar
visible), hold down
.
■ When the unit is first commissioned,
the display is in German:
Sprache
Dansk
Cesky
Bulgarski
Deutsch
Wählen mit
ê
ê
ç
DE
BG
CZ
DK
ê
ê
(
■ Manually switching some appliance
components during commissioning
enables the heat pump control unit to
display messages. These are not
appliance faults.
Commissioning, inspection, maintenance
Further details regarding the individual steps
(cont.)
5604 692 GB
