Vidikron Vision 15, Installation & Operation Manual

Page: 74 / 82

Serial Communications
60 Vidikron Vision Model 15 Installation/Operation Manual
RRD02 Selects the LETTERBOX aspect ratio RRDOK
RRD03 Selects the INTELLIWIDE aspect ratio RRDOK
RRD04 Selects the CINEMA (2.35:1) aspect ratio RRDOK
RRD05 Selects the INTELLIWIDE 2.35 aspect ratio RRDOK
RRE00 Turns the projector OFF RREOK
PON Turns the projector ON Random (Note 2)
RRF00 Selects the UP button on the remote control RRFOK
RRF01 Selects the DOWN button on the remote control RRFOK
RRF02 Selects the LEFT button on the remote control RRFOK
RRF03 Selects the RIGHT button on the remote control RRFOK
RRF04 Selects the ENTER button on the remote control RRFOK
RRG00 Selects the MENU button on the remote control RRGOK
RRG01 Selects the EXIT button on the remote control RRGOK
Table 6-1. Serial Commands (continued)
Command Description Reply
Notes:
1. All image quality settings must be made with the remote control. After the image adjustments are
complete, you can use these commands to store the settings in the selected memory.
2. The power on command (PON) will not provide an OK reply; it will instead reply with a random character.
For your automation system, simply ensure that you receive a character after the PON command. If you
do not get any reply after PON, send PON again.